JAXA launched H3 Flight No. 6 at 09:53:59 JST on 12 June 2026 from the Tanegashima Space Center - the first flight of the H3 '30 configuration'.
The 30 configuration lifts off on three liquid-fuel LE-9 engines and no solid rocket boosters, a simplified build meant to cut launch cost; it can place over 4 tonnes in sun-synchronous orbit.
The second stage reached its planned orbit; the test payload VEP-5 flew with six small university/organisation satellites, two of whose separation (PETREL, STARS-X) JAXA confirmed about 16 minutes after liftoff.
It was the H3's return to flight after the Flight 8 failure of 22 December 2025, which lost the QZS-5 (Michibiki) navigation satellite.
Maiden flight of the H-IIA, the H3's predecessor
H3 Test Flight 1 fails: second-stage engine does not ignite; ALOS-3 (DAICHI-3) Earth-observation satellite destroyed
H3 Flight 2 reaches orbit - first successful H3 launch
Final (50th) H-IIA flight carries GOSAT-GW; H-IIA retires after 49 successes in 50 launches
H3 Flight 8 fails to place navigation satellite QZS-5 (Michibiki) in orbit
H3 Flight 6 - debut of the 30 configuration - succeeds
Japan's national space agency; co-developer and launch authority for the H3
Prime contractor that builds and operates the H3 (and earlier the H-IIA)
Fuel is heated by cooling the combustion chamber and that gas drives the turbopump; a portion is then bled off rather than burned. With no separate pre-burner the engine has fewer parts, which lowers cost and the risk of combustion failures.
Simple Analogy: Using the engine's own waste heat to spin its pumps.
GS Paper III > Science & Technology > Space technology
General Awareness > Science & Technology > Space
H3 variant with three LE-9 engines and no solid boosters; the low-cost version of the vehicle.
H3 first-stage liquid oxygen/liquid hydrogen engine using the expander bleed cycle.
Near-polar orbit that passes over a place at the same local solar time each day; used by Earth-observation satellites.