Premier Energies commissioned a 7 GW N-type TOPCon G12R solar cell plant at Naidupeta, Andhra Pradesh, on 21 September 2026 - India's largest solar cell manufacturing facility.
The plant takes the Hyderabad-based company's total solar cell capacity to 10.6 GW, the highest of any manufacturer in India.
It was built at a capital cost of Rs 3,293 crore on 101 acres, can turn out about 88,000 cells an hour, and targets an average cell efficiency of about 25.8% once stabilised; trial production has begun.
The plant uses AI-based process control and a Zero Liquid Discharge system that treats and reuses its water.
It comes after ALMM List-II for solar cells took effect on 1 June 2026, requiring projects under the ALMM order to use domestically made, enlisted cells.
A solar cell turns sunlight into direct current through the photovoltaic effect. TOPCon adds an ultra-thin tunnel oxide and doped polysilicon layer to an N-type wafer, cutting electron losses and raising efficiency above older PERC cells. India assembles far more modules than it makes cells, so cells are the import bottleneck.
Simple Analogy: Plenty of car assembly lines, too few engine factories.
MNRE's list of approved domestic cell makers, in force from 1 June 2026, alongside List-I for modules.
Key: Projects covered by the ALMM order must use List-I modules, and those modules must in turn use List-II cells - pushing demand onto Indian cell plants.
Production-linked incentives for integrated solar manufacturing, run by MNRE.
Key: Total outlay Rs 24,000 crore: Tranche I of Rs 4,500 crore (approved April 2021, administered by IREDA) and Tranche II of Rs 19,500 crore (approved September 2022, administered by SECI).
Integrated solar cell and module manufacturer; now India's largest cell maker by capacity
Issues the ALMM order and runs the solar PLI scheme
Naidupeta lies in southern Andhra Pradesh, on the Chennai-Kolkata national highway corridor, north of the Tamil Nadu border. The company's module plants are in Telangana.
GS Paper III > Infrastructure: Energy; Indian Economy - industrial policy
General Awareness > Current Affairs - economy and energy
Recently, India's first 'National Investment and Manufacturing Zone' was proposed to be set up in
Answer: Andhra Pradesh
Consider the following States: 1. Andhra Pradesh 2. Kerala 3. Himachal Pradesh 4. Tripura How many of the above are generally known as tea-producing States?
Answer: All four States
Kalamkari painting refers to
Answer: a hand-painted cotton textile in South India
Gandikota canyon of South India was created by which one of the following rivers?
Answer: Pennar
"Kuchipudi" is a classical dance form of which state?
Answer: Andhra Pradesh
Tunnel oxide passivated contact - a high-efficiency N-type solar cell design.
MNRE's approved list of solar PV cell makers, mandatory for covered projects from 1 June 2026.
Water system in which wastewater is treated and reused, leaving almost no liquid effluent.