Indian Railways commissioned Kavach Version 4.0 for the first time on South Central Railway on 23 September 2026, over the 108 route-km Malkajgiri–Kamareddi section of the Hyderabad Division.
It replaces Kavach 3.2 on the section; SCR already runs Kavach 3.2 over 1,465 route km.
Kavach is India's indigenous Automatic Train Protection system: it prevents Signal Passing at Danger (SPAD), controls speed and reduces collision risk, including in bad weather.
Version 4.0 adds better location accuracy, better signal-aspect transmission in large yards, station-to-station links over optical fibre and a direct interface with electronic interlocking.
Kavach 4.0 was approved by RDSO in July 2024 and was first commissioned on the Mathura–Kota section of the Delhi–Mumbai route on 30 July 2025.
RDSO approves the Kavach 4.0 specification
Approved for speeds up to 160 kmph
First commissioning, Mathura–Kota section of the Delhi–Mumbai route
Kota–Nagda section completed
First commissioning on South Central Railway, Malkajgiri–Kamareddi
Railway Ministry's R&D and standards body; approved Kavach 4.0
Railway zone whose Hyderabad Division hosts the new Kavach 4.0 section
SPAD is a train passing a signal at 'stop' without authority — a leading cause of collisions. An ATP system like Kavach reads signals and train position, warns the driver and applies brakes automatically if the driver does not.
Simple Analogy: A co-driver who hits the brake if you jump a red light.
General Awareness > Indian Railways safety initiatives
GS Paper III > Infrastructure — Railways; indigenous technology
India's indigenous Automatic Train Protection / collision-avoidance system
Safety Integrity Level 4 — the highest safety certification level for railway signalling systems
Computer-based signalling that controls points and signals safely; Kavach 4.0 interfaces with it directly