The US Federal Aviation Administration (FAA) said on 28 September 2026 that it will delay certification of the Boeing 737 MAX 10 after a software issue was found in the aircraft's flight management computer (FMC).
FMC software versions 14 and 14.1, developed by GE Aerospace, can lose automated flight guidance, including vertical navigation (VNAV), if a programmed path is changed during a go-around or missed approach.
The FAA will convene a Corrective Action Review Board (CARB) to decide whether the fault is a safety-of-flight risk; no new certification date has been given.
Boeing shares fell about 7% on 28 September; Indian carriers Akasa Air, Air India and SpiceJet hold large unfilled Boeing orders.
Boeing first learns of the issue from an operator report
Boeing completes an internal assessment
Boeing notifies 737 operators
Boeing begins a formal safety review
FAA confirms the MAX 10 certification is delayed; Boeing shares fall about 7%
US civil aviation regulator; certifies aircraft designs
India's civil aviation regulator, under the Ministry of Civil Aviation
The flight management computer handles route, navigation and performance calculations. Vertical navigation (VNAV) is its automated mode for climb, cruise and descent. A go-around is an aborted landing in which the aircraft climbs away to try again.
Simple Analogy: Like a car's navigation dropping its route just as you take a detour.
General Awareness > International organisations and regulators
Corrective Action Review Board, an FAA panel that judges whether a defect is a safety-of-flight risk.
An aborted landing in which the pilot climbs away to attempt the approach again.