On 4 October 2026 the foundation was laid at Burripalem in Guntur district, Andhra Pradesh, for 177 houses to be built with 3D concrete printing (3DCP) under PMAY-G, described by the Centre as the country's first pilot housing project using the technology.
The pilot covers Burripalem and Obulanayudupalem villages, costs about Rs 14 crore and is due in six months, with CSIR-Central Building Research Institute, Roorkee, undertaking the construction.
3DCP is construction-scale additive manufacturing: a robotic printer extrudes a cement-based mix layer by layer from a digital design, with no timber or steel formwork.
The same event started work on 3 lakh PMAY-G 2.0 houses sanctioned to Andhra Pradesh, worth Rs 3,600 crore.
India's first 3D-printed house inaugurated at IIT Madras by Finance Minister Nirmala Sitharaman. Tvasta Manufacturing Solutions, a start-up of IIT Madras alumni, built the single-storey house of about 600 sq ft.
India's first 3D-printed post office, also described as the world's first, opened at Cambridge Layout, Bengaluru. Larsen & Toubro built it in 43 days with technical guidance from IIT Madras; Union Minister Ashwini Vaishnaw inaugurated it.
The country's first 3D concrete-printed rural house inaugurated at CSIR-CBRI, Roorkee, by Minister of State for Rural Development Chandra Sekhar Pemmasani, who asked CBRI to pilot 100 such houses.
Foundation laid for the 177-house 3DCP pilot under PMAY-G at Burripalem, Guntur district, Andhra Pradesh.
A pucca house with basic amenities for houseless rural families and those living in kutcha or dilapidated houses. Ministry of Rural Development; launched by the Prime Minister on 20 November 2016 at Agra as the restructured Indira Awaas Yojana.
Key: Unit assistance of Rs 1.20 lakh in plains and Rs 1.30 lakh in North-Eastern and hill states; minimum house size 25 sq m including a cooking area; cost shared 60:40 between Centre and State (90:10 for North-Eastern and Himalayan states); beneficiaries drawn from SECC 2011 and Awaas+ lists verified by Gram Sabhas.
Continuation of the scheme approved by the Union Cabinet on 9 August 2024 to build 2 crore more rural houses, over the 2.95 crore targeted in 2016-17 to 2023-24.
Key: Outlay of Rs 3,06,137 crore: Rs 2,05,856 crore Central share and Rs 1,00,281 crore State share. Andhra Pradesh's 3 lakh houses fall under this phase.
National laboratory for building science and technology under the Council of Scientific and Industrial Research; built the first 3D concrete-printed rural house and is undertaking the Andhra Pradesh pilot. Established in 1947.
Nodal ministry for PMAY-G; partner in the 3DCP pilot.
Burripalem and Obulanayudupalem are villages in Tenali mandal of Guntur district, in the Krishna delta region of coastal Andhra Pradesh. Roorkee in Uttarakhand houses CSIR-CBRI, where the prototype rural house was printed. Chennai (IIT Madras) and Bengaluru (Cambridge Layout post office) hold India's two earlier 3D-printing landmarks.
GS Paper 3 > Science and Technology > Developments and their applications in everyday life
General Awareness > Government Schemes and Science in News
Recently, India's first 'National Investment and Manufacturing Zone' was proposed to be set up in
Answer: Andhra Pradesh
Consider the following States: 1. Andhra Pradesh 2. Kerala 3. Himachal Pradesh 4. Tripura How many of the above are generally known as tea-producing States?
Answer: All four States
Kalamkari painting refers to
Answer: a hand-painted cotton textile in South India
Gandikota canyon of South India was created by which one of the following rivers?
Answer: Pennar
"Kuchipudi" is a classical dance form of which state?
Answer: Andhra Pradesh
Building an object by depositing material layer upon layer from a digital model, as opposed to cutting material away.
A digital 3D model of a building that carries its design data; the printer works directly from it.
The ability of freshly printed layers to keep their shape and carry the layers placed above them.